What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
09.06.2025 02:52

the problem then depends on "how fast does the fuse operate?".
eight
At one ohm, the resistor has a maximum of 1 watt power.
Can we state Alia Bhatt as the most versatile actress in Bollywood now?
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
Mark Hughes dissects how Verstappen's win bid imploded - The Race
For this case there are devices called Metal oxide varistors (MOV).
nine
This is where this question deviates from being a 'generic' question, and becomes more specific.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
It also is a device that limits the change in current flow.
He then describes Rainy Season and Lightning.
An Optometrist Is Begging People To Stop This Common Habit ASAP - AOL.com
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
In schematic diagrams this is the symbol for a fuse:
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
2024–10–10[John johnson John Johnson ]
Can the fuse protect the electronic devices from lightning instead of a surge protector.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Ask Ethan: What are the "first stars" in the Universe? - Big Think
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
The bolt then partially travels down the line to your home.
Why didn't people like the Game of Thrones ending?
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
Edit 2024–10.
but I think this circuit , shows a few more pieces.
15 Retinol-Rich Foods To Stimulate Collagen - Vogue
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
It seems Mohan does not understand the difference between a comment and an Answer.
a photo is worth a thousand words.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
2024–10–14 [Omar Gharbi Omar Gharbi ]
Upvotes:
This is where the MOV conducts again, and dissipated the energy.
First Sentence:
WBD Shareholders Nix David Zaslav’s 2024 Pay Package In Non-Binding Vote - Deadline
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
2024–10–16 [ OO OLAOYE OYEBODE ]
(Dc diagram shown, AC is similar).
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
These are simplified answers to the original question, and does not change anything I wrote above.
Now when you have a certain ac resistance, then a current flows in a loop.
What is lightning?
This is 'the assistant's answer'
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
But it can get overloaded, and no longer works.
The MOV will conduct when the voltage exceeds 50% of line voltage.
There are two important concepts here.
What does a fuse do?
An AC voltage/ current source, and an ac inductive load.
A fuse is a non-resetable over current circuit protector.
I post the exact comment here.
This device then solves the entire problem.
[image of Common-mode choke]
He then asserts :
At least they know the answer if they wanted it.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
A circuit breaker is similar, but is resettable.
This one hit behind the barn.
Barnstars:
Here is a simplified AC power diagram.
[old diagram got deleted by accident]
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
The third is lightning and “how it gets conducted into a home.”
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
Because the load is inductive, the current lags the voltage.(by a bit).
So, the voltage could go up to 500 volts, and the fuse will not open up.
These devices are installed between the “hot” and “neutral” and protective ground.
but this device (an Inductor) … impedes the rapid changes in the current.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
He then describes the function of a fuse.
so, what happens?
But… the neutral is now “floating” because of the 1 ohm resistance.
The other is “what does a “fuse” do?”
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
One
This is the picture of an electronic coil of wire wound around a core of magnetic material.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
One is “what exactly is in a ‘surge protector’ ? ”
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
what exactly is a ‘surge’ protector?
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
There are three different concepts here that are getting confused.